Discussions

Expand all | Collapse all

kanban field selection not sticking

  • 1.  kanban field selection not sticking

    Posted 07-17-2018 17:33
    I have a Kanban report created and is on my home page for my app. every time I open that app's home page it loses its card group filter. Anybody else having a problem with this?


  • 2.  RE: kanban field selection not sticking

    Posted 07-23-2018 14:24
    Hi Adrienne,

    This weekend we released our Kanban reports to general access with some enhancements and fixes from the beta version. Are you still having this issue since our Sunday release?


  • 3.  RE: kanban field selection not sticking

    Posted 07-23-2018 17:16
    Yup, sure am! I just checked and my Kanban has lost its filters again.


  • 4.  RE: kanban field selection not sticking

    Posted 07-23-2018 17:55
    Hi Adrienne,

    Is this the Card Group option above the Card Details that is being cleared out of the Filter section below the Card Details in the report customization page? I just wanted to make sure if it was losing the Card Group settings or the Filter settings? So if you view and edit the report in the table it is coming from and edit the report to add a filter for example and save it, then you go back to the dashboard and this exact same report loses that filter and it has to be added once again to the original report?


  • 5.  RE: kanban field selection not sticking

    Posted 11-21-2018 21:28
    I am experiencing a filter problem with the Kanban report.  If you select a dynamic filter from the left, click on a card to edit or display, then click "Return" to re-display the report, the filter does not stick.  Is there anyway to persist that Dynamic filter upon Return?


  • 6.  RE: kanban field selection not sticking

    Posted 07-23-2018 19:10
    Hi Evan- I don't think we are talking about the same report. Please PM me and I will give you more details. in any event, it's the "Show group for" field that's losing its selection when displayed on a home page.


  • 7.  RE: kanban field selection not sticking

    Posted 07-23-2018 19:19
    Hi Adrienne,

    The show a group for under the Card Groups header. So the issue is that when you select show a group for and you do a list of options to display as columns if you save that report and then view it again on the dashboard it loses the options you selected? Then if you go back to the table and open that report up those options are gone?



    If that is happening that is definitely unusual behavior and I would suggest opening a support case with our Care team to have them take a look at it with you and then pass that information on to our PD team. You can create a support case https://login.quickbase.com/qb/support/redirecttorealm?subject=New+Case &rdr=https://login.quickbase.com/qb/support/redirecttorealm?subject=New+Case">here or by clicking on the question mark icon in the upper right hand corner when logged into an app in Quick Base and selecting manage cases. That way they can take a closer look at the issue you are seeing in your app and reproduce it for our team since we don't currently have any escalations or open issues around that. 


  • 8.  RE: kanban field selection not sticking

    Posted 07-23-2018 19:21
    yup, except those are not my fields. please see print screen from the home page I'm discussing:



  • 9.  RE: kanban field selection not sticking

    Posted 07-23-2018 19:26
    Hi Adrienne,

    That screenshot is just snagged from an example application I have built out with Kanban reports.

    From your screenshot it looks like you are getting the too many options selected warning message. That usually happens when someone selects the Show a group for and there are too many groups selected. If when looking at the report you had less then ten total options selected (including the option for blank if that field is not required) I would suggest putting in a case and a Care rep can take a look at that with you. 


  • 10.  RE: kanban field selection not sticking

    Posted 07-23-2018 20:00
    ok, I'll put in a case... the thing is, when you go in and fix the filter, then it displays, but the next day it's gone again! see example of the selection blanked out and then having it be operational once I re-fix the selector.