Qrew EXCLUSIVE: 50% Off Camp Quickbase 🏕️
Get an answer to your question, or share something helpful to start a conversation.
Recently active
I created a snapshot field to statically store the value of a lookup field. The field worked fine on the data already in the table but when I imported new data (through a google drive connection) the snapshot field is null even though the lookup field it's set to capture is populated. My expectation was that when a new record was imported the snapshot field would be set based on the initial value of the lookup field but it seems to be getting set before the lookup field is calculated. Appreciate any suggestions! Thanks, Sam ------------------------------Sam Pollaro------------------------------
Hello, I have a unique situation in that I have a table called TableA. TableA has many relationships and is rather intricate as it has a way to generate documents and such. This table also has many activity records, document records, etc. Unfortunately, the activities table mentioned above is at 90% capacity. What would be the best way to save/ archive the TableA records along with it's child records/ documents? Looking for any and all suggestions or ideas Thank you in advance------------------------------Shane Miller------------------------------
Good Afternoon QB Community, Wondering if anyone else has experienced issues with following hyperlinks into QB? Currently, I have several apps/tables that send out copies of records to personnel with an attached link. Many of these are Custom Messages and not just copies of forms. I know in the past I haven't had issues with the links redirecting to the QB Mobile App, but recently I'm experiencing it redirecting to my Google Chrome browser (default) on my iPhone. This is less than ideal when personnel have individual logins to access through the application. Any insight or tips/tricks I can use to guarantee links to redirect to the mobile app instead of the default browser?------------------------------Aidon Olligschlager |Flight Operations Technical SupportPentastar AviationWaterford MIaolligschlager@pentastaraviation.com | 248-202-9587------------------------------
I am contacting you to inquire if QuickBase uses SharePoint in any capacity to deliver services to your clients. We're concerned about this vulnerability: CVE-2023-24955. Does Quickbase use an on-premise SharePoint Server that directly impacts your clients?------------------------------Delbert Gordon------------------------------
I have a pipeline setup to insert new records into the same table base on a count entered into a previously created record. The issue I am having is a continuous loop of entering new records Here is what I have New record created with a count in a field Count is Set Asset Definition equals the asset type being setup The count should create that number of new records in the same table The pipeline is as follows Record Created Prepare Bulk Record Upset Search Records This search is being performed on a helper table that has one field in it for equipment count (i.e, one record with 1, 2 records with 2, 3 records with 3 and so on For each record DO - Add a Bulk Upsert Row Commit Upsert All assets are being entered into the same table with asset types and asset definitions. Any subsequent equipment that is being added is basically tied to the parent asset with a Unit ID #Looking for what I am missing here that is causing the loop------------------------------Zint Joseph---------
Hi,I wanted to know about Quickbase's new features integrating AI into the platform. How can we use AI in Quickbase in already existing apps? Or is this feature just for building new apps?------------------------------Praharsha K------------------------------
Hi, I was wondering if someone could help me out here - I have created a chart using specific filtering criteria, however, when I click on the chart title to display the underlying data table, I get the message "Something went wrong, Try reloading this page".I have checked and double-checked the access levels of the fields and parameters used in the report, and even created a new report with the same filtering criteria. But the error persists. ------------------------------Kshitij NRProduct ManagerEnerdatics------------------------------
Hi, I have two tables named Startup and Shareholder. The Startup is the parent to shareholders. There is a field called Shareholders Name in the child table. I want to display shareholders' names from the child table to a specific field in the parent table as a dropdown. I tried using the option "Values from this field may be a source for dropdown lists in other apps". It displays all the shareholder's records. But I want it to display shareholders' records for specific Startups. Thanks in advance. ------------------------------Prakash Murali------------------------------
If statement if 'Work Email' Field is blank... in the Extensions table is blank, when I go to add a new extension the 'Related Employee' gets populated with dozens of Employee Names, until you enter an email address. The Work Email (populates a Text-Email field) if the same as the HR-Employees Work Email field puts the HR-Employee name in the Related Field. As soon as any email address is added the Related Employee field will only show one employee name, of the matching Employee email address. I would like to use an IF statement and from searching I see [Not IsNull) to check a field. It seems to me that is what I need to check for so that the new Extensions form Related Field stays blank until an email address is added. This is the formula in the 'Related Employee' field in the Extensions table. ToText(GetFieldValues(GetRecords("{12.EX.'" & [Text-email] &"'}",[_DBID_HR_EMPLOYEES]),68)) The image shows the field in the form blank, as soon as any text is entered
I have a work order form where it is required to select which type: Service (Customer), Service Lead (non-customer), Installation (has both customer and lead option), Quote (both customer and lead option), and Employee Time-Off (Each it's own section). I have all my form rules working the way I want them to within adding a record but once that record is saved and viewed later, I only want the section Customer OR Lead to show depending on which one was filled out. How can I use a rule where if a field is just filled out (not specific data or matching - just entered) can I trigger hiding the section that wasn't filled out? When editing/viewing the form (especially on mobile) I only want to see the necessary data.------------------------------Jillian P------------------------------
I'm hiding/showing tabs based on a field value. The tabs represent different workflows. The workflows use the same fields as well as fields unique to that workflow. In the past, I was able to select the common fields on each tab. I got a warning when saving the form, but I was allowed to add the same field on each tab. In the new form builder, I'm not able to repeat a field, even on a separate tab. I went back to the old form and it appears that too has been locked down. Any ideas on work around? Is there a setting which allows me to select the same field on a single form? ------------------------------Cathy Wilbur------------------------------
If I have a lookup field that is an address, can I use a button to copy that field to another address field?Or do I need to look up each component (street, city, state, zip, etc) and then copy each component to each corresponding component?------------------------------Mike Tamoush------------------------------
Hello,Does Quickbase have the ability to sort when customizing a summary report?Thanks!Jenna------------------------------Jenna Odom------------------------------
I have created a new app in my "Realm". However, I am unable to access the app and/or the tables within the app when I try to create a PIPELINe. Please advise. Thank you------------------------------BuildPro------------------------------
Team, I am looking for solution where user can click button and approve request over mail. WHAT I WANT: I saw that in some services (like SNOW) you can click on the bottom, and it create "Reply" mail which you send from your mail client.Afterwards this mail it used to confirm in system required fields.Any idea how to achieve it with quickbase? DO NOT WANT: I do not want button to direct user to quickbase app as:1) I cannot set it to EOTI2) I do not want to share App Token it button URL3) Do not want people to be directed to quickbase, as I used it before, and if they are not logged in, they will see XML error.------------------------------Adam Krzyzanek------------------------------
I have a code page that creates a (copied) record, manipulates a bunch of relationships and at the end of the code opens in the new record in edit mode. The issue is when the user hits native save button it redirects back to the code page rather than the table home page or even the record in view mode (ideal). Unfortunately the redirect causes another copy of the record to be created in a wonderful loop. Have tried to use replace vs href when building the new URL and rdr but it behaves the same. Have other similar code pages but this is the first time I have run into the issue. Any help would be great.------------------------------Nathan Maubert------------------------------
how to create a pop up in quickbase without javascript?------------------------------Mariela Vasquez------------------------------
Hi;Is anyone else considering looking elsewhere due to the rate increase? Possibly quickbase's increases are staggered but ours is effective today - 65% increase!!!! Our company can't afford that. We are a small company and do not need 20 users for the least cost package. What are smaller companies to do when they only need say 10 users?------------------------------Liz Kaminski------------------------------
HI, Is there a way to create a Bar chart report without assigning the average and total values to the y-axis? Regards, Prakash M------------------------------Prakash Murali------------------------------
I am having trouble uploading a record to QB table via Restful API / JQuery. I can pull records without issue. I can also go to the QB API portal and run the same code their without issue.Even hardcoding the call with dummy data is not working. An internet search did not pull up anything that appeared to pertain to my situation. Can you take a look and see what I might be missing? (function below / error message attached)headers = {'QB-Realm-Hostname': 'somesite.quickbase.com','Authorization': 'QB-USER-TOKEN blahblahblah','Content-Type': 'application/json','Access-Control-Allow-Origin': 'https://somesite.quickbase.com'};body = `{"to":"-TABLENAME-","data":[{"6":{"value":"Test Upload 8"},"10":{"value":"HTEST"}}]}`;const result = await $.ajax({url: 'https://api.quickbase.com/v1/records/query',type: 'POST',headers: headers,data: JSON.stringify(body),success: function (response) {console.log("Success");},error: function (xhr, ajaxOptions, thrownError) {alert(xhr.status);alert(thrownError);}
I've tried numerous times to get them to help with the 70% price increase because we are so small and don't need 20 users to no avail. They are hard lined that they only want the large clients and not us - smaller businesses. If you need to contact upper management regarding your own price increase; some of their emails are: nforbes@quickbase.com; ejennings@quickbase.com; raliabadi@quickbase.com; swebber@quickbase.com; skottmann@quickbase.com; mmcguinness@quickbase.com; skottmann@quickbase.com; eolson@quickbase.com; dwinbush@quickbase.com; jkennedy@quickbase.com; droberts@quickbase.com; especiel@quickbase.com; aadekeye@quickbase.com I've canceled with my 30 day notice but they are making me pay until November 25th because that is when my monthly billing begins! This is on the verge of criminal. I've been with QuickBase since they began - very sad. I'm going back to ACT! Act! Pricing – On-premises and Cloud-based Options Only reason I left
If a user role is set to view only (no modify), when they look at a Kanban, they get a red x symbol. This is confusing as it discourages the user from even clicking on the card. Does anyone know if there is a creative work around? All I can think of is to set every field to no edit, instead of the entire table. Im not even sure that would work. Any ideas? ------------------------------Mike Tamoush------------------------------
Does anyone have any experience with setting up a link between Quickbase and Enverus/OpenInvoice that could help me with some things?------------------------------Amber Goodman------------------------------
Is there any way to perform an auto refresh on a connected table more frequently than once an hour?------------------------------A Brown------------------------------
Hi, we have a relationship as shown below. We are adding documents(files) in the order table and the files get saved in the documents table. We will have to show all the files uploaded in the orders table in both the child tables (accession and results) which are related to the parent order. What is the best way to achieve this? Thanks, Naveen------------------------------LabOS Dev------------------------------
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.