Forum Discussion
BlakeHarrison
Qrew Captain
One option would be to set your Automation up to add one record and then update a value in the original record by incrementing it by 1. You could then have your trigger set to look at this field or whatever other field you need to trigger it on. Of course, you would only want it to trigger if the value of this field is less than the value of the field indicating how many records need to be created.
You may also be able to do it with Pipelines. Pipelines doesn't have the ability to iterate through an action a set number of times, though, so you will also need a formula that can calculate how many records have been created vs how many need to be created. You can then use this in a Lookup Record step to see if the process needs to run again, though each iteration would require a Lookup Record step and a conditional Add Record step and Pipelines is currently limited to 26 step (I think) in any one Pipeline.
------------------------------
Blake Harrison
bharrison@datablender.io
DataBlender - Quickbase Solution Provider
Atlanta GA
404.800.1702 / http://datablender.io/
------------------------------
You may also be able to do it with Pipelines. Pipelines doesn't have the ability to iterate through an action a set number of times, though, so you will also need a formula that can calculate how many records have been created vs how many need to be created. You can then use this in a Lookup Record step to see if the process needs to run again, though each iteration would require a Lookup Record step and a conditional Add Record step and Pipelines is currently limited to 26 step (I think) in any one Pipeline.
------------------------------
Blake Harrison
bharrison@datablender.io
DataBlender - Quickbase Solution Provider
Atlanta GA
404.800.1702 / http://datablender.io/
------------------------------
AswinBabu
4 years agoQrew Member
Thank you for replying. I will check this out
------------------------------
Aswin Babu
------------------------------
------------------------------
Aswin Babu
------------------------------
- MarkShnier__You4 years agoQrew LegendAn automation concurrently support 50 steps but I would suggest limiting yourself to 25. You can have those first 24 steps create 24 children and populate a field with child number in each step from 1 to 24.
You can then look up the number of children that were required from, the parent down to the children and have Step 25 delete any excess children where their child # was higher than what was required.
------------------------------
Mark Shnier (YQC)
Quick Base Solution Provider
Your Quick Base Coach
http://QuickBaseCoach.com
mark.shnier@gmail.com
------------------------------